Is a safety guidewire needed for retrograde ureteroscopy? / Fio guia de segurança é necessário na ureteroscopia?

Summary Introduction: It is generally advised to have a safety guidewire (SGW) present during ureteroscopy (URS) to manage possible complications. However, it increases the strenght needed to insert and retract the endoscope during the procedure, and, currently, there is a lack of solid data supporting the need for SGW in all procedures. We reviewed the literature about SGW utilization during URS. Method: A review of the literature was conducted through April 2017 using PubMed, Ovid, and The Cochrane Library databases to identify relevant studies. The primary outcome was to report stone-free rates, feasibility, contraindications to and complications of performing intrarenal retrograde flexible and semi-rigid URS without the use of a SGW. Results: Six studies were identified and selected for this review, and overall they included 1,886 patients where either semi-rigid or flexible URS was performed without the use of a SGW for the treatment of urinary calculi disease. Only one study reported stone-free rates with or without SGW at 77.1 and 85.9%, respectively (p=0.001). None of the studies showed increased rates of complications in the absence of SGW and one of them showed more post-endoscopic ureteral stenosis whenever SGW was routinely used. All studies recommended utilization of SGW in complicated cases, such as ureteral stones associated with significant edema, ureteral stricture, abnormal anatomy or difficult visualization. Conclusion: Our review showed a lack of relevant data supporting the use of SGW during retrograde URS. A well-designed prospective randomized trial is in order.

Resumo Introdução: O uso de fio guia de segurança (FGS) costuma ser recomendado para a realização de ureteroscopia para prevenir e solucionar complicações durante o procedimento. Seu uso, porém, aumenta a força necessária para manipular o aparelho endoscópico dentro da luz ureteral e, atualmente, existe uma carência de dados consistentes que indiquem o uso do FGS em todos os procedimentos. Método: Uma revisão da literatura foi realizada em abril de 2017 utilizando as ferramentas PubMed, Ovid e The Cochrane Library para identificar estudos relevantes. O desfecho primário da análise foi reportar taxas de resolução dos cálculos, viabilidade, contraindicações e complicações relacionadas ao não uso do FGS. Resultados: Seis estudos foram incluídos na análise, totalizando 1.886 pacientes, nos quais foi realizada ureteroscopia semirrígida ou flexível sem o uso do FGS no tratamento de cálculos renais ou ureterais. Somente um estudo relatou taxa livre de cálculos com ou sem FGS, sendo 77,1 e 85,9%, respectivamente (p=0.001). Todos os estudos mostraram não haver aumento da taxa de complicação na ausência do FGS e um deles relatou aumento de estenose ureteral pós-endoscopia no grupo que utilizou o FGS. Todos os estudos recomendam o uso do FGS em casos complicados, como cálculos ureterais associados a edema de mucosa, estenose ureteral, anomalias anatômicas ou dificuldade de visualização do cálculo. Conclusão: Nossa revisão mostrou que faltam dados relevantes para justificar o uso do FGS durante a ureteroscopia.

Evaluation of disposable medical device packaging materials under ozone sterilization

Abstract Introduction Ozonization is an alternative sterilization process for heat-sensitive medical devices. However, the side effects of this process on packaging materials should be verified. Methods Four types of commercial disposable packaging for medical devices were evaluated after undergoing ozone sterilization: crepe paper sheet, non-woven fabric sheet (SMS), medical grade paper-plastic pouch and Tyvec©-plastic pouch. For each material, the gas penetration through the microbiological barrier was measured. Other packaging properties, such as chemical composition, color, tactile and mechanical resistance, were also evaluated after sterilization, by using characterization techniques, namely microbiological indicators, infrared spectroscopy, tensile test and optical microscopy. Results All commercial disposable packaging showed good ozone penetration. Crepe paper and SMS were chemically and mechanically modified by ozone, while Tyvec© only suffered mechanical modification. Paper-plastic pouch was the packaging material which just experienced an acceptable reduction in tensile resistance, showing no variations on chemical or visual properties. Conclusion The results suggest that medical grade paper-plastic pouch is the most appropriate disposable medical device packaging to be sterilized by ozone when compared to other materials.

Macrophages adhesion rate on Ti-6Al-4V substrates: polishing and DLC coating effects

Abstract Introduction Various works have shown that diamond-like carbon (DLC) coatings are able to improve the cells adhesion on prosthesis material and also cause protection against the physical wear. On the other hand there are reports about the effect of substrate polishing, in evidence of that roughness can enhance cell adhesion. In order to compare and quantify the joint effects of both factors, i.e, polishing and DLC coating, a commonly prosthesis material, the Ti-6Al-4V alloy, was used as raw material for substrates in our studies of macrophage cell adhesion rate on rough and polished samples, coated and uncoated with DLC. Methods The films were produced by PECVD technique on Ti-6Al-4V substrates and characterized by optical profilometry, scanning electron microscopy and Raman spectroscopy. The amount of cells was measured by particle analysis in IMAGE J software. Cytotoxicity tests were also carried out to infer the biocompatibility of the samples. Results The results showed that higher the surface roughness of the alloy, higher are the cells fixing on the samples surface, moreover group of samples with DLC favored the cell adhesion more than their respective uncoated groups. The cytotoxity tests confirmed that all samples were biocompatible independently of being polished or coated with DLC. Conclusion From the observed results, it was found that the rougher substrate coated with DLC showed a higher cell adhesion than the polished samples, either coated or uncoated with the film. It is concluded that the roughness of the Ti-6Al-4V alloy and the DLC coating act complementary to enhance cell adhesion.

Application of post-discharge region of atmospheric pressure argon and air plasma jet in the contamination control of Candida albicans biofilms

Introduction:Candida species are responsible for about 80% of hospital fungal infections. Non-thermal plasmas operated at atmospheric pressure are increasingly used as an alternative to existing antimicrobial strategy. This work investigates the action of post-discharge region of a non-thermal atmospheric plasma jet, generated by a gliding arc reactor, on biofilms of standard strain of Candida albicans grown on polyurethane substrate. Methods Samples were divided into three groups: (i) non-treated; (ii) treated with argon plasma, and (iii) treated with argon plus air plasma. Subsequently to plasma treatment, counting of colony-forming units (CFU/ml) and cell viability tests were performed. In addition, the surface morphology of the samples was evaluated by scanning electron microscopy (SEM) and optical profilometry (OP). Results Reduction in CFU/ml of 85% and 88.1% were observed in groups ii and iii, respectively. Cell viability after treatment also showed reduction of 33% in group ii and 8% in group iii, in comparison with group i (100%). The SEM images allow observation of the effect of plasma chemistry on biofilm structure, and OP images showed a reduction of its surface roughness, which suggests a possible loss of biofilm mass. Conclusion The treatment in post-discharge region and the chemistries of plasma jet tested in this work were effective in controlling Candida albicans biofilm contamination. Finally, it was evidenced that argon plus air plasma was the most efficient to reduce cell viability.

Robotic-assisted laparoscopic partial nephrectomy: initial experience in Brazil and a review of the literature

CONTEXT AND PURPOSE: Partial nephrectomy has become the standard of care for renal tumors less than 4 cm in diameter. Controversy still exists, however, regarding the best surgical approach, especially when minimally invasive techniques are taken into account. Robotic-assisted laparoscopic partial nephrectomy (RALPN) has emerged as a promising technique that helps surgeons achieve the standards of open partial nephrectomy care while offering a minimally invasive approach. The objective of the present study was to describe our initial experience with robotic-assisted laparoscopic partial nephrectomy and extensively review the pertinent literature. MATERIALS AND METHODS: Between August 2009 and February 2010, eight consecutive selected patients with contrast enhancing renal masses observed by CT were submitted to RALPN in a private institution. In addition, we collected information on the patients' demographics, preoperative tumor characteristics and detailed operative, postoperative and pathological data. In addition, a PubMed search was performed to provide an extensive review of the robotic-assisted laparoscopic partial nephrectomy literature. RESULTS: Seven patients had RALPN on the left or right sides with no intraoperative complications. One patient was electively converted to a robotic-assisted radical nephrectomy. The operative time ranged from 120 to 300 min, estimated blood loss (EBL) ranged from 75 to 400 mL and, in five cases, the warm ischemia time (WIT) ranged from 18 to 32 min. Two patients did not require any clamping. Overall, no transfusions were necessary, and there were no intraoperative complications or adverse postoperative clinical events. All margins were negative, and all patients were disease-free at the 6-month follow-up. CONCLUSIONS: Robotic-assisted laparoscopic partial nephrectomy is a feasible and safe approach to small renal cortical masses.Further prospective studies are needed to compare open partial nephrectomy with its minimally invasive counterparts.

The patient-physician interactions as seen by undergraduate medical students

CONTEXT: The interaction between a physician and his or her patient is complex and occurs by means of technical performance and through a personal relationship. OBJECTIVE: To assess the interaction between the medical professional and his or her patient with the participation of medical students assuming a role as observers and participants in a medical appointment in an outpatient office. DESIGN: Questionnaire interview study. SETTING: General Medicine outpatient offices, Hospital das Clínicas, Faculty of Medicine, University of Säo Paulo. PARTICIPANTS: Medical students performed an ethnographical technique of observation, following 199 outpatient medical appointments with Clinical Medicine Residents. MAIN MEASUREMENTS: A questionnaire filled out by observer students measured the physician's attitudes towards patients, as well as patients' expectations regarding the appointment and his or her understanding after its completion. RESULTS: Patients showed higher enthusiasm after the appointment (4.47 + or - 0.06 versus 2.62 + or - 0.10) (mean + or - SEM), as well as some negative remarks such as in relation to the waiting time. The time spent in the consultation was 24.66 + or - 4.45 minutes (mean + or - SEM) and the waiting time was 123.09 + or - 4.91 minutes. The physician's written orientation was fairly well recalled by the patient when the doctor's letter could be previously understood. CONCLUSION: Patients benefit from physicians who keep the focus on them. In addition, this program stimulated the students for their accomplishment of the medical course